Need a new lathe?

Jul 27th 2017 | News | 1 comment

If you’re thinking about getting a new lathe take a look at this one installed by G&S Timber supplies in Penrith ( click link below).

https://www.facebook.com/toolsandtimber/videos/vb.151179811562935/1219812511366321/?type=2&theater

Need a new shed too?

1 Comment

Dave Harding on 29th July 2017 at 5:48 pm
I have been thinking of a new lathe but don’t think I could fit this on my postcode never mind my shed!!

Recent Comments

Andrew on We cannot meet but we can share TurningsA coincidence - snap! My brother is a potter and last year I turned a few lids for different pots he had made! It was fun though in all hone…
Peter Green on More Turnings As We Cannot MeetVery nice work, a talented couple.
Vish on We cannot meet but we can share TurningsAndrew- well done for an amazing collection. I agree turning multiples is tedious and in my opinion as time goes on the usual thing that hap…
Tony Mayled on We cannot meet but we can share TurningsYes for practice staff.i turned them and my wife Gaynor did the pyrography ( their names) on the cups Just started turning bowls out of a fl…
Vish on We cannot meet but we can share TurningsWell done Tony - I assume it’s for the other members of the practice. My daughter a GP asked for some pens for her staff and I said no probl…

More time isolated in the shed.
Turned this child’s roundabout (based on Richie’s). Just can’t finish it as I am struggling to justify child-safe paints and ribbons as essential. It will have to wait. ... See MoreSee Less

8 months ago ·

View on Facebook

Spent an afternoon of “social distancing “ in the shed and came out with this 4 sided box in ash (turned on five centres) with a cocobolo insert in the lid.

While the club is closed down why not post pictures of what you are making and keep the “club spirit” going.

Stay well. ... See MoreSee Less

8 months ago ·

View on Facebook

8 months ago ·

View on Facebook

MARCH 2020 CLUB NIGHT CANCELLED

As a result of the rapid spread of the coronavirus, the Committee has been considering whether we should meet in March.

I’m sure you will agree that the health and well-being of our members is of the upmost importance and we need to reduce the risk of members catching the virus. Consequently, we have decided to cancel the March meeting.

The position is changing daily and we will keep you informed about future meetings with as much notice as possible.

Stay healthy

Howard Hughes (CNWWA Secretary) ... See MoreSee Less

8 months ago ·

View on Facebook

LES SYMONDS DEMONSTRATION ON SCORCHING

The recent club night featured a welcome return by Les Symonds of "PREN". Les specialises in artistic and sculptural turnings, as well as functional and utilitarian pieces. He ran the "PREN" shop in Bala for several years but now focuses his woodturning activities on demonstrating, teaching, writing and producing turned items for galleries and other commissions.

Les gave us once again a very interesting demonstration, this time concentrating on scorching.

To read more about the visit by Les, check out the full report by our Chairman, Peter Green, on our website:

www.cnwwa.org.uk/reports/february-meeting-2020-les-symonds/ ... See MoreSee Less

8 months ago ·

View on Facebook

Need a new lathe?

1 Comment

Recent news

Recent Comments